Tel       : +90.212.325 15 61 
E-Mail :
E-Mail :

TF5050PUH for pressure-free systems

The "TF5050PUH" is without an pre-heater and is designed for hydraulic and lubricating oils.
It is not intended for pressurized systems or where the cleaning unit is placed lower than the system it will purify. The TF has the ability to "lift/suck" oil into the filter, but must have free fall back to the tank/oil reservoir "by gravity".

Water down to 100ppm. (0.01%) and particles 1-3 micron
Available in 230v and 400v.


Hydraulic systems such as balers, compactors, ro-ro equipment. This is mounted on the IBC tank for cleaning oil, such as freezer compressor oil or other places where it is not possible to permanently instal the unit, There are two sets of oil in attendance, one to use and one for purification; just select one of the two as needed.

Specifications Purifiner TF5060PMH

  • Capacity:
  • Oil amount:
  • Oil type: All hydraulic and lubricating oils Viscosity: 32 - 320
  • Max. pressure in: No back-pressure
  • Power consumption: 400 watt, 230 or 400 volt
  • Connection: 3/8" BSP external thread

Warranty: 12 months
Weight: 26 kg
Dimensions: 40 x 30 x 40 cm (H x W x D)